WATER LEVEL CONTROLLERS

Product Details:

Being a well-distinguished company in the market, we are into offering Hamsa Double Tank Automation.



Double Tank Auto ON

This model shows the levels of the two no. Overhead tanks. From borewell / sump / wellusually the motor gets ON goes to first over head tank fills that tank gets over flow that over flow water falls to second over head tank after filling that overhead tank our model puts OFF the motor. This model shows 2 nos. levels of first over head tank 2 nos. level of second over head tank when water comes below prefixed level either in 1st over head tank or in 2nd over head tank the motor gets on. Fills 1st over head tank then overflows to 2ndover head tank after reaching 100% in the over head tank if puts OFF the motor.

Product Details:

Owing to our proficiency in this domain, we are providing our clients an optimum range of Water Level Controller.

Features:

• Longer service life
• Effective performance
• Energy efficiency

Additional Information:

• Item Code: 10
• Production Capacity: 1PHASE
• Delivery Time: 1 DAY
• Packaging Details: COTTON BOX

Product Details:

A float switch is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices.

Float switches range from small to large and may be as simple as a mercury switch inside a hinged float or as complex as a series of optical or conductance sensors producing discrete outputs as the liquid reaches many different levels within the tank. Perhaps the most common type of float switch is simply a float raising a rod that actuates a microswitch.

A very common application is in sump pumps and condensate pumps where the switch detects the rising level of liquid in the sump or tank and energizes an electrical pump which then pumps liquid out until the level of the liquid has been substantially reduced, at which point the pump is switched off again. Float switches are often adjustable and can include substantial hysteresis. That is, the switch's "turn on" point may be much higher than the "shut off" point. This minimizes the on-off cycling of the associated pump.

Some float switches contain a two-stage switch. As liquid rises to the trigger point of the first stage, the associated pump is activated. If the liquid continues to rise (perhaps because the pump has failed or its discharge is blocked), the second stage will be triggered. This stage may switch off the source of the liquid being pumped, trigger an alarm, or both.

Product Details:

Owing to our proficiency in this domain, we are providing our clients an optimum range of Water Level Controller.

Features:

• Longer service life
• Effective performance
• Energy efficiency

 

Product Details:

We are one of the most reliable companies in this domain and are into offering Hamsa Delux Model Water Level Controller.


This deluxe model has different types which suits to single phase motor,

Three phase motor and single phase submersible motor.

Front Facia of Deluxe Model

• Shows clear indication of water levels in the overhead tank and sump tank

• Shows Voltage variation if any in the left bottom corner, it show green indicator for normal

voltage, red indicator for high or low voltage.

• Has push to ON/OFF switch to select AUTO/MANUAL operations.

• Show motor ON indication with different colours at different modes of unit. It shows Green indication in case of Auto mode, Orange indication in case of manual mode and Red indication while motor is under dry run condition.

• Has Soft touch "NEED" button to switch ON the motor irespective of any level in the overhead tank.

• Has Soft touch "SILENCE" button to mute the audio Alarm while motor is under dry run condition

• Shows Green indication upward arrow indication for flowing of water into the overhead tank.

• Shows Red indication near the overhead tank with beep sound for overflow of water.

•When the water reaches maximum level in the overhead tank.
•When there is a low voltage or high voltage
•When the water in the sump goes below foot valve
•When the water stops flowing to the overhead tank.
•When the switch is in "OFF" position.

switches "ON" the motor if :
Gives Alarm:
•When there is voltage fluctuation.
•When the motor is under dry run condition due to foot valve blockage or priming fault in motor.
•When water overflows from the overhead tank at "MANUAL" mode.